浮法玻璃熔窑火焰空间石油焦部分替代重油燃烧的数值模拟

针对浮法玻璃熔窑火焰空间建立模型并进行了数值模拟，在保证热值相同的前提下，对比研究了重油燃烧及将石油焦部分替代重油燃烧时的流场分布特征。结果表明，石油焦部分代替重油燃烧后，两种燃料可很好地混合燃烧，窑炉内温度制度基本不受影响；石油焦着火时间比重油长，两种燃料混合燃烧时平均着火点滞后于仅使用重油时，且燃烧路径更长，燃烧时产生了大量CO，整个火焰空间及烟气出口处NOx的平均排放量与仅使用重油相比降低了30.02%，NOx减排效果明显。     

Sequence-Dependent Nanofiber Structures of Phenylalanine and Isoleucine Tripeptides

The molecular design of short peptides to achieve a tailor-made functional architecture has attracted attention during the past decade but remains challenging as a result of insufficient understanding of the relationship between peptide sequence and assembled supramolecular structures. We report a hybrid-resolution model to computationally explore the sequence–structure relationship of self-assembly for tripeptides containing only phenylalanine and isoleucine. We found that all these tripeptides have a tendency to assemble into nanofibers composed of laterally associated filaments. Molecular arrangements within the assemblies are diverse and vary depending on the sequences. This structural diversity originates from (1) distinct conformations of peptide building blocks that lead to different surface geometries of the filaments and (2) unique sidechain arrangements at the filament interfaces for each sequence. Many conformations are available for tripeptides in solution, but only an extended β-strand and another resembling a right-handed turn are observed in assemblies. It was found that the sequence dependence of these conformations and the packing of resulting filaments are determined by multiple competing noncovalent forces, with hydrophobic interactions involving Phe being particularly important. The sequence pattern for each type of assembly conformation and packing has been identified. These results highlight the importance of the interplay between conformation, molecular packing, and sequences for determining detailed nanostructures of peptides and provide a detailed insight to support a more precise design of peptide-based nanomaterials.     

CO2对油田地下水环境中Q235钢和X70钢腐蚀行为的影响

为了探明辽河油田地下水环境中CO₂对Q235钢和X70管线钢的腐蚀规律,采用动电位极化技术及交流阻抗技术研究了不同CO₂浓度对该环境下两种钢腐蚀行为的影响,并利用光学显微镜对试样腐蚀界面进行表征。结果表明:随着CO₂浓度的增加,Q235和X70钢的交流阻抗图谱的半径均减小,腐蚀电流密度增大,腐蚀坑数量、深度和面积都增加,腐蚀敏感性增大。在低浓度CO₂环境下(CO₂含量为10%时),Q235钢的腐蚀敏感性比X70钢更高;而在高浓度CO₂环境下(CO₂含量为20%、40%、60%时),Q235钢的腐蚀速率反而较小,耐腐蚀性更好。     

桁架式火星探测器的着陆缓冲特性分析

着陆缓冲机构是着陆器实现行星探测软着陆的关键部位之一,它的缓冲性能直接关系到着陆器是否能安全地在行星表面实现软着陆。根据某院提供的火星着陆器模型,在三维建模软件中建立着陆器的合理简化模型,为了提高分析着陆器软着陆过程冲击响应的准确性,采用MSC公司的Patran/Dytran有限元软件,用瞬态动力学的方法对着陆器的缓冲性能进行分析。仿真结果与试验数据十分吻合,着陆器的缓冲和传力性能良好。因此,采用拉杆缓冲的桁架式火星着陆器是可行的,仿真结果与试验数据也为今后的火星探测提供了参考。     

A Practical Method for Animating Anisotropic Elastoplastic Materials

This paper introduces a simple method for simulating highly anisotropic elastoplastic material behaviors like the dissolution of fibrous phenomena (splintering wood, shredding bales of hay) and materials composed of large numbers of irregularly-shaped bodies (piles of twigs, pencils, or cards). We introduce a simple transformation of the anisotropic problem into an equivalent isotropic one, and we solve this new “fictitious” isotropic problem using an existing simulator based on the material point method. Our approach results in minimal changes to existing simulators, and it allows us to re-use popular isotropic plasticity models like the Drucker-Prager yield criterion instead of inventing new anisotropic plasticity models for every phenomenon we wish to simulate.     

压裂水平井产能预测方法研究进展

水平井压裂技术在低渗透及非常规储层中得到了广泛应用,压裂后水平井的产能预测关系到油田开发方案的制定,因此,国内外学者对压后渗流模型的建立和求解方法做出了不懈的努力。本文详细回顾了国内外学者所建压裂水平井产能预测模型及求解方法,指出了不同模型和求解方法的优缺点,并展望了压裂水平井产能模型的发展方向。     

两池火耦合作用下柴油拱顶罐热响应的数值模拟

化工园区多池火事故是典型的高后果低概率事件。鉴于目前两池火辐射模型存在一定局限性，本文采用数值模拟方法，以3个直线排布的5000m³柴油拱顶罐为研究场景，从热释放速率、火焰形态、热辐射强度三方面分析两池火燃烧特性，并与单池火场景对比，考虑储罐间距这一影响因素，进一步研究目标储罐热响应。结果表明：采用GB 50160—2008（2018年版）规定的防火间距，两燃烧罐产生的池火会发生耦合作用，并得出目标储罐受到的热辐射强度分布，最高热辐射达17.04kW/m²；两池火作用下目标储罐的温度、Mises应力与失效时间分别为644℃、356MPa、936s，单池火为488℃、280MPa、2880s，目标储罐在两池火作用下的变形也比单池火更为严重；随着储罐间距增加，目标储罐的温度与Mises应力逐渐减小，失效时间逐渐增加，当储罐间距为标准防火间距的2.5倍（20m）时，失效时间为2800s，与单池火作用产生的失效时间2880s较为接近。本研究可为优化储罐防火间距及区域韧性提升提供理论指导。     

袋装水泥装车机及拨板机构的设计与研究

针对袋装水泥装车半自动化问题，设计一款全自动装车机。首先，根据袋装水泥车间生产状况，确定水泥装车方案，即采用抽屉式逐层装车原理，利用ＳｏｌｉｄＷｏｒｋｓ创建装车机三维模型；其次，为使水泥包快速准确地到达指定位置，针对拨板机构中的分拨板及导柱进行受力分析，建立其力学模型，推导出应力公式；最后，通过 ＡＮＳＹＳ有限元软件进行分拨板的力学仿真，为后续的优化设计提供依据。     

裸眼井中扩张式封隔器力学行为研究

封隔器在石油天然气开采中起着非常重要的作用,而扩张式封隔器在裸眼井中广泛应用。本文采用有限元软件建立了裸眼封隔器与地层的模型,对胶筒在坐封过程中与井壁接触应力的变化进行了研究,并研究了在不同摩擦系数下接触压力的变化,结果表明,建立粗糙井壁面能够更加符合实际情况,胶筒肩部为应力集中的区域,地层与胶筒的接触应力会随着摩擦系数的增加而减小。研究结果为裸眼扩张式封隔器的设计和改进提供了理论依据。     

热冲压工艺参数对22MnB5马氏体钢汽车B柱性能影响的有限元模拟

通过有限元仿真软件Autoform分析了热冲压过程中工艺参数的变化对22MnB5马氏体钢B柱起皱、回弹、减薄、马氏体量以及强度的影响。结果表明:22MnB5马氏体钢B柱热冲压最优化工艺参数为加热温度930 ℃,冷却速率80 ℃/s。该工艺参数下,热冲压过程各处均完成马氏体转变,硬度分布均匀,材料减薄率较低,热冲压成形效果好,尺寸精度高,冲压件强度均大于1400 MPa。